Dry Freight Box Bodies

Every kilo you save on the box is a kilo you can sell

UFON dry freight bodies are built from FRP-skinned PET foam and PP-honeycomb sandwich panels — high stiffness at minimum weight. Eight replaceable modules, delivered CBU, SKD or flat-packed CKD with full drawing sets.

One dry box, eight engineered modules

The same modular logic as our refrigerated bodies — every module ships flat, assembles fast and replaces independently.

Drag to rotate · Scroll to zoom · Click a part

Application illustration — not to scale; panel system and fittings follow your specification.

  1. 01

    Roof Panel

    Lightweight FRP-skinned honeycomb roof panel — weatherproof gelcoat surface, front nose fairing and three internal roof bows for span stiffness.

  2. 02

    Front Panel

    FRP sandwich front wall with bonded sandwich structure; smooth interior for easy cleaning, amber clearance lamps pre-fitted at top corners.

  3. 03

    Side Panel · Left

    FRP-skinned PET / PP-honeycomb panel with five external reinforcement posts and riveted trim — high stiffness at minimum weight.

  4. 04

    Side Panel · Right

    Same honeycomb construction as the left module, shown with the optional 800×1700 mm side access door — aluminum frame, perimeter seal, twin hinges, cam-lock rod and handle.

  5. 05

    Floor System

    Flat anti-slip diamond-pattern 304 steel or aluminum floor over cross-members, with stainless rear threshold plate at the door opening.

  6. 06

    Rear Door · Left

    Lightweight sandwich swing door — 304 stainless or galvanized skin, perimeter rubber seal, twin lock rods with cam locks and three external hinges.

  7. 07

    Rear Door · Right

    Matching swing door closing at the center seam — synchronized lock rods, center handle set and red reflective tape at the lower edge.

  8. 08

    Sub-Frame

    C-section rails with five cross-members — high-strength aluminum or SS400 / Q325 steel, screw-connected for CKD flat-pack shipping, with front mounting brackets and rear under-run beam.

Exploded view of a dry van truck body built from sandwich panels, showing modular panels and rear doors
Assembled dry van truck body with sandwich panel walls and side access door

The panel makes the difference

Dry freight duty favors stiffness and weight over extreme insulation. Two core options from our panel line cover it:

PET Foam

PET foam — strength plus light weight, fully recyclable, expanding beyond cold rooms.

PP Honeycomb

Polypropylene honeycomb — high rigidity with minimal weight, optional nonwoven veil.

Stop shipping air — choose how your bodies arrive

Finished boxes burn freight budget. UFON ships the same body three ways: fully built (CBU), major assemblies pre-built (SKD), or flat-packed kits with drawing sets for local assembly (CKD).

CBU

Completely Built Up

Finished bodies, ready to mount on your chassis.

SKD

Semi Knocked Down

Major assemblies pre-built — panels, doors, sub-frame — for fast local mounting.

CKD

Completely Knocked Down

Flat-packed kits with full drawing sets for maximum freight savings and local assembly.

Specifications — configured to your order

Dry body dimensions, panel system and fittings follow your chassis and cargo. Values below describe the available configuration space.

Core optionsPET foam / PP honeycomb sandwich
Skin optionsFRP/GRP gelcoat · Aluminum · 304 stainless · Galvanized
ReinforcementExternal posts with riveted trim on side panels
Side access doorOptional 800×1700 mm single-leaf, aluminum frame, cam-lock rod
FloorAnti-slip diamond 304 steel or aluminum over cross-members
Rear doorsTwin swing doors, lock rods with cam locks, three hinges per leaf
Sub-frameHigh-strength aluminum or SS400 / Q325 steel, screw-connected for CKD
Body dimensionsFully customized to chassis and cargo
DeliveryCBU / SKD / CKD with full drawing sets
Close-up of the side access door on a dry van truck body with hinges and locking rod
Rear doors of a dry van truck body with stainless steel panels, locking rods and cam locks

Stop guessing specs — get an engineered answer

Send your chassis model, cargo and route. Our engineers reply within one business day with a tailored specification and a CBU / SKD / CKD delivery plan.